Transportation and storage methods of high-frequency induction heating equipment tubes

Transportation and storage methods of high-frequency induction heating equipment tubes?

1. The packaging of large electronic tubes is equipped with anti-vibration devices, but they should also be handled with care to avoid severe vibration. Before shipping, check whether the springs, tapes and screws that support the tube in the box are loose. When transporting, it is not allowed to lay down horizontally, and must be transported upright. When transporting tubes by car, drive slowly according to road conditions.

2. In winter in severe cold areas, the temperature difference between indoor and outdoor is very large. When the pipe is moved into the room from the outside, the glass is likely to burst due to the sudden change of the ambient temperature, so there must be a buffering process.

3. The temperature of the warehouse where the electronic tubes are stored should be kept within the range of 0-40 °C. The required temperature is not more than 70% (the electronic tube is easily damaged in a humid environment).

Acids and other toxic and volatile chemicals that can cause corrosion are not allowed in the warehouse. At the same time, it is necessary to avoid vibration sources around the warehouse to prevent the pipes from being damaged by shocks.